Basic Info.
Product Description
Product Description
The UAV detection and direction finding integrated system adopts Cognitive Radio Protocol Cracking (CRPC) technology to solve the detection, identification, direction finding, and orientation of civilian UAVs. At the same time, the real-time position of the target UAV and the pilot is determined, and the flight trajectory of the UAV is tracked in real time. It can be used in aviation airports, prisons, important industrial facilities, national defense, public security areas, sports venues and major events.
The cognitive radio protocol cracking technology is the fourth-generation UAV defense method. This technology uses an antenna array to monitor the radio environment in the defense area, and continuously collects radio signals in the defense area for 24 hours. The signal is transmitted to the signal processing unit to accurately demodulate and decode the UAV signal, and then the analyzed UAV signal is transmitted to the data server through the network, and the data server performs unified management of the received UAV signal to UAVs flying illegally and privately carry out interference countermeasures.
1.1List of Supporting Equipment
Item | Specification | |
Passive Detection | Detection Frequency | Range: 70mHz to 6gHz Main bands 2.4G, 5.8G Optional bands: 433M, 900M, 1.4G, 5.2G |
Detection Range | 8km (target with DJI Mavic 2) | |
Direction Finding Accuracy | ≤3°Hovering ≤10°Moving |
1.2 Product Function
Module | Description |
Passive detection | The system only passively receives and does not emit any electromagnetic signals, and can detect the drone model and its electronic fingerprint |
Dead Angle Free Detection | Can accurately determine the direction of the drone to indicate the target |
Accurate recognition | Can accurately identify different drones of the same brand, model, and frequency band |
Defense | 2km |
Black & White List | The black and white list can be marked with one click, and the black-flying drones can be attacked, and the white-listed drones will not be interfered. |
Full model library | Supports the full range of DJI, mainstream brands in the market and DIY drones, covering more than 98% of mainstream models in the market. |
1.3 Working Environment
Item | Specification |
Operating temperature | -40ºC~+70ºC |
Operating Humidity | W95% |
Atmospheric pressure | 86kPa to 106kPa |
Rated voltage | 220V±22V AC50Hz±lHz/60Hz±lHz |
1.4 Mechanical Characteristics
1. UAV omnidirectional detection device | ||
RF processing unit | ||
Contents | Data | |
Length | 410mm | |
Width | 190mm | |
Height | 335mm | |
Mainhost weight | 12kg | |
Note: Consult technical personnel for specific products. | ||
Total length | 330mm | |
Total width | 310mm | |
Total height | <5kg |
Stable Characteristics
Item | Specification |
Shell Protection | IP66 |
Continuously working | Unlimited |
Technical standard | Meet the requirements specified in 5.10 of GJB 6724-2009 |
RF Characteristics
Contents | Data |
Receiving Sensitivity | 2.4G ≤ -95dBm |
5.8G ≤ -95dBm | |
Others ≤ -95dBm | |
Receiving bands supports | 70MHz to 6000MHz |
Detection Airspace | 360° full range |
Communication Means | FM,2FSK,4FSK,GFSK,MSK,BPSK,QPSK,16QAM,64QAM,OFDM,DSSS,FHSS |
Allowable radiant intensity of environmental electromagnetic wave | GB8702-2014 Requirements of Electromagnetic Environment Control Limits |
Detection mode | Panoramic scanning, Channel scanning |
Working time | 24H*365D |
Note: The above size is the shape size of the detection box under the closed state;
2. Device Erection and Deployment
Select a wide-view field outdoors, and start to deploy and use the equipment. Before using the equipment, first check the specifications and quantity of standard parts according to the equipment list points, and then assemble them according to the installation steps below.2.1 Operation Environment
Select a suitable site outdoors and deploy the equipment for use. Usually selected in the outdoor open highland or the top of the building, pay attention to whether there is obvious shielding and the building with strong interference equipment.2.2 Antenna Connection
The receiving frequency band antenna is screwed to the radio processing unit in a clockwise direction one by one according to the corresponding interface identified on the antenna and the radio processing unit. The antenna in the same frequency band can be used, and the detection antenna in different frequency bands cannot be used.Note: When connecting the antenna, connect the antenna and radio processing unit according to the interface identification, otherwise the damage will be caused to the radio processing unit after the system is turned on.
2.3 Power and internet connection
(1) Network access:The radio processing unit can be connected to the host terminal through TCP / IP interface using optical fiber or standard network cable; or link the device to the wireless network or 4G network
We help our customers to choose the most appropriate anti-drone products based on clients´ requirements and type and size of location or facility that has to be protected. We are constantly searching for new anti-drone technologies to enhance our list of anti-drone products.
Why Choose Us
3> We offer the OEM/ODM services for our products meet your special needs.
4> We offer instant service with new drone detection adding service, and software team keeps on increasing drones that can support to detect.
5> There is a long-term cooperation with the shipping couriers, can make the goods more quickly and efficiently deliver.
6> We will provide best after sale service for the customers. You are welcomed to visit our factory and have some training for the operation. Anyway, we will try our best to meet your requirements.
7> We can help you to pass your official certifications.
1>Factory training and remote training on installation and operation.
2>1 year remote software upgrade and long term remote troubleshooting.
3> 7*24H contact for support.
4> Engineering team support for unrecognized drone adding when require.
5> Customization and future customization after usage.